• [APM-I1] Advances in powder metallurgy soft magnetic composite materials
  - Dr. Radovan Bures (Institute of Materials Research)

• [APM-I2] In situ Formation of TiB2 particulates in Fe matrix from (FeB+TiH2) Powder Mixture
  - Prof. Ji-Soon Kim (University of Ulsan)

• [APM-I3] Effect of Ultrasonication Followed by Low Energy Ball Milling on Sintering Properties of CNT Reinforced Al-Zn-Mg-Cu Powder
  - Dr. Haris Rudianto (Brno University of Technology)

• [NFM-I1] Controlling the Structure and Morphology of Semiconductor Nanocrystals in a Microfluidic Reactor
  - Dr. Chan Gi Lee (Institute for Advanced Engineering)

• [RMR-I1] Fabrication of Nanosized Cobalt Powder from Cobalt(II) hydroxide of Spent Lithium Ion Battery
  - Dr. Jung Yeul Yun (Korea Institute of Materials Science)

• [RMR-I2] Disruption of the alumina layer during sintering of aluminium in nitrogen
  - Prof. Tadeusz Pieczonka (AGH University of Science and Technology)

• [RMR-I3] Synthesis and Caracterization of ZnSe:Eu Quantum Dots
  - Dr. Bum Sung Kim (Korea Institute of Industrial Technology)

• [RMR-I4] Effects of strain ratio and strain rate on microstructure and magnetic properties of Nd-Fe-B nanocrystalline magnets during hot-deformation process
  - Dr. Jung-Goo Lee (Korea Institute of Materials science)

• [RMR-I5] Applying Recycling Technologies to Actual End-of-Life Products
  - Dr. Ryan Ott (Ames Laboratory)

• [AMP-I1] Surface Patterning of Chalcogenide Glass via Imprinting Process
  - Prof. Yong Gyu Choi (Korea Aerospace University)

• [AMP-I2] The synthesis and characterization of nano ceria coated with Si oxide using hydrolysis reaction of liquid-glass
  - Prof. Myungho Kong (Adama science & Technology University)

• [MIM-I1] METAL POWDER FOR ADDITIVE MANUFACTURING OF TI-6AL-4V BY SELECTIVE ELECTRON BEAM MELTING: EFFECT OF POWDER REUSE OR RECYCLING TIMES
  - Prof. Huiping Tang (Northwestern Institute for Nonferrous Metal Research)

• [C&M-I1] Simulation and its Applications in Powder Injection Molding
  - Prof. Seong Jin Park (POSTECH)

• [C&M-I2] Hierarchic architectured agglomerates of hydrogen-reduced copper nanopowders
  - Prof. Hyoung Seop Kim (POSTECH)

• [C&M-I3] Microstructure-based modeling of texture evolution in primary recrystallized cold-rolled IF steels
  - Dr. Dong-Kyu Kim (Korea Atomic Energy Research Institute)

• [C&M-I4] Finite element analysis of deformation behaviors of randomly distributed hollow spheres reinforced metal matrix composites
  - Mr. YI JE CHO (Pusan National University)

• [C&M-I5] Relevant Methods to Investigate Processability of Powder Injection Molding Materials
  - Prof. Berenika Hausnerova (Tomas Bata Unniversity)

• [C&M-I6] Application of CFD Simulation to CVD/CVI Process of Silicon Carbide
  - Dr. Kyoon Choi (Korea Institute of Ceramic Engineering and Technology)

• [C&M-I7] Characterization of NiTi-nano alumina composites
  - Dr. Mohammad Farvizi (Materials and energy research center)

• [C&M-I8] Microstructure based modeling of Ni superalloy powder for high temperature forming process
  - Dr. Eun Yoo Yoon (Korea Institute of Materials science)

• [NNP-I1] Au-based Nanocomposites for Electrocatalysis
  - Prof. Haibing Xia (Shandong University)

• [NNP-I2] Chemical Transformation in Nanomaterials: a Powerful Tool to Synthesize Porous Nanostructures for Advanced Catalytic Applications
  - Prof. Bin Zhang (Tianjin University)

• [NNP-I3] Highly monodispersed PbS QD for outstanding QD solar cells
  - Dr. Bo Hou (University of Oxford)